Ring Power corporation
Main Duties & ResponsibilitiesPrimary Job RoleConducts all assigned work in a safe manner, adhering to all applicable safety, environmental and contamination control policies, procedures and regulations.
Wears proper personal protective equipment.
Attends and successfully completes required technician training classes.
Maintains necessary set of tools required for job performance to diagnose, disassemble and assemble components to manufacturer's specifications.
Diagnose and perform designated repairs on customer or company owned equipment including, but not limited to, mechanical, electrical, hydraulic troubleshooting, maintenance and repairs.
Works in a neat and orderly fashion, constantly looking for ways of improving the methods of work, work area, and safety standards.
Inspects components to insure maximum parts are being reused to control repair costs.
Completes required documentation utilizing appropriate software to document repairs performed on equipment, and accounting for repair times.
Monitors job expenses versus repair estimates and ensures that the supervisor is aware of any cost over run, prior to the job being completed.
Approaches work in a positive manner, maintains conduct that is supportive of the work Team and sets the standard for others to follow.
Contributes to Team efforts by accomplishing tasks on time while maintaining safety and quality expectations.
Trains and/or mentors others in department.
Assumes Supervisors positon temporarily, as necessary.
Performs other duties as assigned.
Essential Job CompetenciesSafety:
fully supports, encourages and follows safe work behavior, and considers safety of paramount importance in the workplace.
Job Specific Skills:
Demonstrates the required depth and mastery of knowledge and skill associated with the job as identified in the Learning Management System (LMS) and other applicable sources.
Demonstrates the effective application of the job specific knowledge, skills and ability required to resolve job related challenges in the workplace.
Refer to job specific training requirements for the job identified in the LMS.
Communication:
Uses active listening skills, conveying information with the appropriate medium that is clear and easily understood.
Uses feedback to verify effective and accurate communication has occurred.
Ensures that others having a need to know are kept informed about developments, progress, problems and plans through consistent, effective communication.
Avoids surprises.
Information Gathering:
Checks all appropriate sources in identifying the information needed for analysis and decision making.
Uses skillful methods in obtaining high quality relevant information.
Checks work to ensure accuracy and completeness.
Compares observations or finished work to what is expected to find inconsistencies.
Clearly documents sources, and organizes the information according to the research needs.
Takes Initiative:
Takes appropriate action to resolve issues without requiring direction.
Seeks out others involved in a situation to learn their perspectives.
Makes difficult decisions in a timely manner.
Is willing to make decisions in difficult or ambiguous situations, when time is critical.
Assertive in a group when it is necessary to facilitate change, overcome an impasse, face issues, or ensure that decisions are made.
Results Oriented:
Has a strong sense of urgency and commitment to achieve desired results in the face of obstacles and frustrations.
Remains focused, does not get bogged down in unnecessary detail.
Identifies and utilizes the most efficient methods to successfully achieve tasks on time despite unforeseen events.
Driven, maintains a sense of urgency and adjusts schedules as needed to achieve without sacrificing quality of work.
Adaptability:
Adapts to changing business needs, conditions, and work responsibilities.
Adapts approach, goals, and methods to achieve solutions and results in dynamic situations.
Recovers quickly from setbacks, and finds alternative ways to reach goals or targets.
Open to different and new ways of doing things; willing to modify one's preferred way of doing things.
Credibility:
Demonstrated concern to be responsible, reliable, and trustworthy.
Maintains commitments.
Respects the confidentiality of information or concerns shared by others.
Is honest and forthright with people.
Takes personal responsibility for the quality and timeliness of work.
Punctual, follows instructions, policies, and procedures.
Personal Development:
Takes responsibility for personal learning and development by acquiring and refining technical and professional skills needed in job related areas.
Obtains developmental opportunities proactively.
Actively seeks and embraces growth opportunities.
Company OverviewIn 1962, Ring Power Corporation became a full-line Caterpillar dealer in North Florida, and later expanded its authorized territory to include Central Florida.
Today, Ring Power Corporate headquarters in St.
Augustine oversees the operations of 18 branch locations throughout the state of Florida, including large regional facilities in Tampa and Orlando and crane and forklift sales and service facilities in Pompano.
Ring Power also has eight facilities outside of Florida - The Carolinas, Georgia, Texas & Tennessee- to serve the needs of other specialized industries and customers.
Ring Power Corporation has become one of the largest Caterpillar dealers in the Southeastern United States through dedication to the mission of customer service.
In order to preserve the Customers First reputation that Ring Power was built on, we continually train our employees and work closely with our customers to assure complete satisfaction, especially after the sale.
Currently, more than 2,300 employees at 20
locations throughout Florida and the United States work hard to provide the highest quality construction equipment, backed by responsive, professional service and support at every levelQualificationsEducation and ExperienceFormal Education High School diploma or GED Experience 5-6 years Required / CredentialsCompleted all required training curriculum to be designated a Tech I.
Able to easily and effectively comprehend written material and communicate orally and in writing with employees and customers.
Not Required but Highly Desired CriteriaProficient in the use of a computer, Microsoft Office products and relevant Dealer software programs.
Successfully completed relevant specialized equipment technical courses.
Updating of KnowledgeJob requirements frequently change requiring re-training once or more per year.
Responsibility for Change, Innovation, Overall Improvement, and/or EffectivenessProblem Solving Job requires complex problem solving skills in a dynamic environment.
Independent research and analysis are routinely required to develop appropriate solutions.
Awareness and intervention is expected to prevent problems from occurring.
Creativity Job requires creativity as part of carrying out daily activities.
New approaches are encouraged.
Autonomy Job is not normally monitored, but overall objectives are clearly defined.
Use of discretion in how the work is done, setting priorities and decision making is encouraged.
More emphasis is placed on achieving the desired outcome, not on controlling the process.
Working EnvironmentStress Load Occasional exposure to these stresses (less than 20% of the time).
Workload Fluctuation Job frequently involves changes in priorities, complexity and/or quantity of work.
Work Schedule Work is scheduled during regular business hours with frequent requirements to work nights, holidays and weekends.
Organizational ImpactA person's performance in this job has considerable immediate impact on expense, efficiencies or achievement of overall department objectives.
Supervisory ResponsibilityJob has no subordinates / no supervisory responsibility (may work independently or as a member of a team) Physical Demands NA:
Not Applicable O:
Occasionally - (up to 3 hours/day) F:
Frequently - (3-6 hours/day) C:
Constantly - (6-8 hours/day)F:
Climbing O:
Balancing O:
Stooping F:
Kneeling F:
Crouching F:
Crawling F:
Reaching C:
Standing F:
Sitting F:
Walking O:
Feeling F:
Fingering F:
Grasping F:
Repetitive Motion C:
Talking C:
Hearing F:
Pushing - Up to 25 lbs.
F:
Pulling - Up to 25 lbs.
F:
Lifting - Up to 25 lbs.
O:
Pushing - 26-50 lbs O:
Pulling - 26-50 lbs.
O:
Lifting - 26-50 lbs.
O:
Pushing - Over 50 lbs.
O:
Pulling - Over 50 lbs.
O:
Lifting - Over 50 lbs.
Environmental Conditions NA:
Not Applicable O:
Occasionally - (up to 3 hours/day) F:
Frequently - (3-6 hours/day) C:
Constantly - (6-8 hours/day)C:
Inside conditions:
Protection from weather but not necessarily from temperature change.
O:
Outside environmental conditions:
No effective protection from weather.
O:
Extreme cold:
Temperatures below 32 degrees for periods of more than one hour.
F:
Extreme heat:
Temperatures above 100 degrees for periods of more than one hour.
F:
Noise:
sufficient noise to cause the worker to shout to be heard above the ambient noise level F:
Vibration:
Exposure to oscillating movements of the extremities of whole body.
F:
Hazards:
Includes a variety of physical conditions (i.
e.
proximity to moving mechanical parts, electrical current, working in high places, exposure to heat and/or chemicals.
F:
Atmospheric conditions:
One or more of the following conditions that affect the respiratory system or the skin:
Fumes, odors, dust, mists, gases or poor ventilation.
F:
Oils:
There is air and/or skin exposure to oils and other cutting fluids.
O:
Air particulates / contaminants:
the worker is required to wear respirator.
RING POWER CORPORATION, INC.
IS AN EQUAL OPPORTUNITY EMPLOYERAbout the Company:
Ring Power corporation.
Estimated Salary: $20 to $28 per hour based on qualifications.
Wears proper personal protective equipment.
Attends and successfully completes required technician training classes.
Maintains necessary set of tools required for job performance to diagnose, disassemble and assemble components to manufacturer's specifications.
Diagnose and perform designated repairs on customer or company owned equipment including, but not limited to, mechanical, electrical, hydraulic troubleshooting, maintenance and repairs.
Works in a neat and orderly fashion, constantly looking for ways of improving the methods of work, work area, and safety standards.
Inspects components to insure maximum parts are being reused to control repair costs.
Completes required documentation utilizing appropriate software to document repairs performed on equipment, and accounting for repair times.
Monitors job expenses versus repair estimates and ensures that the supervisor is aware of any cost over run, prior to the job being completed.
Approaches work in a positive manner, maintains conduct that is supportive of the work Team and sets the standard for others to follow.
Contributes to Team efforts by accomplishing tasks on time while maintaining safety and quality expectations.
Trains and/or mentors others in department.
Assumes Supervisors positon temporarily, as necessary.
Performs other duties as assigned.
Essential Job CompetenciesSafety:
fully supports, encourages and follows safe work behavior, and considers safety of paramount importance in the workplace.
Job Specific Skills:
Demonstrates the required depth and mastery of knowledge and skill associated with the job as identified in the Learning Management System (LMS) and other applicable sources.
Demonstrates the effective application of the job specific knowledge, skills and ability required to resolve job related challenges in the workplace.
Refer to job specific training requirements for the job identified in the LMS.
Communication:
Uses active listening skills, conveying information with the appropriate medium that is clear and easily understood.
Uses feedback to verify effective and accurate communication has occurred.
Ensures that others having a need to know are kept informed about developments, progress, problems and plans through consistent, effective communication.
Avoids surprises.
Information Gathering:
Checks all appropriate sources in identifying the information needed for analysis and decision making.
Uses skillful methods in obtaining high quality relevant information.
Checks work to ensure accuracy and completeness.
Compares observations or finished work to what is expected to find inconsistencies.
Clearly documents sources, and organizes the information according to the research needs.
Takes Initiative:
Takes appropriate action to resolve issues without requiring direction.
Seeks out others involved in a situation to learn their perspectives.
Makes difficult decisions in a timely manner.
Is willing to make decisions in difficult or ambiguous situations, when time is critical.
Assertive in a group when it is necessary to facilitate change, overcome an impasse, face issues, or ensure that decisions are made.
Results Oriented:
Has a strong sense of urgency and commitment to achieve desired results in the face of obstacles and frustrations.
Remains focused, does not get bogged down in unnecessary detail.
Identifies and utilizes the most efficient methods to successfully achieve tasks on time despite unforeseen events.
Driven, maintains a sense of urgency and adjusts schedules as needed to achieve without sacrificing quality of work.
Adaptability:
Adapts to changing business needs, conditions, and work responsibilities.
Adapts approach, goals, and methods to achieve solutions and results in dynamic situations.
Recovers quickly from setbacks, and finds alternative ways to reach goals or targets.
Open to different and new ways of doing things; willing to modify one's preferred way of doing things.
Credibility:
Demonstrated concern to be responsible, reliable, and trustworthy.
Maintains commitments.
Respects the confidentiality of information or concerns shared by others.
Is honest and forthright with people.
Takes personal responsibility for the quality and timeliness of work.
Punctual, follows instructions, policies, and procedures.
Personal Development:
Takes responsibility for personal learning and development by acquiring and refining technical and professional skills needed in job related areas.
Obtains developmental opportunities proactively.
Actively seeks and embraces growth opportunities.
Company OverviewIn 1962, Ring Power Corporation became a full-line Caterpillar dealer in North Florida, and later expanded its authorized territory to include Central Florida.
Today, Ring Power Corporate headquarters in St.
Augustine oversees the operations of 18 branch locations throughout the state of Florida, including large regional facilities in Tampa and Orlando and crane and forklift sales and service facilities in Pompano.
Ring Power also has eight facilities outside of Florida - The Carolinas, Georgia, Texas & Tennessee- to serve the needs of other specialized industries and customers.
Ring Power Corporation has become one of the largest Caterpillar dealers in the Southeastern United States through dedication to the mission of customer service.
In order to preserve the Customers First reputation that Ring Power was built on, we continually train our employees and work closely with our customers to assure complete satisfaction, especially after the sale.
Currently, more than 2,300 employees at 20
locations throughout Florida and the United States work hard to provide the highest quality construction equipment, backed by responsive, professional service and support at every levelQualificationsEducation and ExperienceFormal Education High School diploma or GED Experience 5-6 years Required / CredentialsCompleted all required training curriculum to be designated a Tech I.
Able to easily and effectively comprehend written material and communicate orally and in writing with employees and customers.
Not Required but Highly Desired CriteriaProficient in the use of a computer, Microsoft Office products and relevant Dealer software programs.
Successfully completed relevant specialized equipment technical courses.
Updating of KnowledgeJob requirements frequently change requiring re-training once or more per year.
Responsibility for Change, Innovation, Overall Improvement, and/or EffectivenessProblem Solving Job requires complex problem solving skills in a dynamic environment.
Independent research and analysis are routinely required to develop appropriate solutions.
Awareness and intervention is expected to prevent problems from occurring.
Creativity Job requires creativity as part of carrying out daily activities.
New approaches are encouraged.
Autonomy Job is not normally monitored, but overall objectives are clearly defined.
Use of discretion in how the work is done, setting priorities and decision making is encouraged.
More emphasis is placed on achieving the desired outcome, not on controlling the process.
Working EnvironmentStress Load Occasional exposure to these stresses (less than 20% of the time).
Workload Fluctuation Job frequently involves changes in priorities, complexity and/or quantity of work.
Work Schedule Work is scheduled during regular business hours with frequent requirements to work nights, holidays and weekends.
Organizational ImpactA person's performance in this job has considerable immediate impact on expense, efficiencies or achievement of overall department objectives.
Supervisory ResponsibilityJob has no subordinates / no supervisory responsibility (may work independently or as a member of a team) Physical Demands NA:
Not Applicable O:
Occasionally - (up to 3 hours/day) F:
Frequently - (3-6 hours/day) C:
Constantly - (6-8 hours/day)F:
Climbing O:
Balancing O:
Stooping F:
Kneeling F:
Crouching F:
Crawling F:
Reaching C:
Standing F:
Sitting F:
Walking O:
Feeling F:
Fingering F:
Grasping F:
Repetitive Motion C:
Talking C:
Hearing F:
Pushing - Up to 25 lbs.
F:
Pulling - Up to 25 lbs.
F:
Lifting - Up to 25 lbs.
O:
Pushing - 26-50 lbs O:
Pulling - 26-50 lbs.
O:
Lifting - 26-50 lbs.
O:
Pushing - Over 50 lbs.
O:
Pulling - Over 50 lbs.
O:
Lifting - Over 50 lbs.
Environmental Conditions NA:
Not Applicable O:
Occasionally - (up to 3 hours/day) F:
Frequently - (3-6 hours/day) C:
Constantly - (6-8 hours/day)C:
Inside conditions:
Protection from weather but not necessarily from temperature change.
O:
Outside environmental conditions:
No effective protection from weather.
O:
Extreme cold:
Temperatures below 32 degrees for periods of more than one hour.
F:
Extreme heat:
Temperatures above 100 degrees for periods of more than one hour.
F:
Noise:
sufficient noise to cause the worker to shout to be heard above the ambient noise level F:
Vibration:
Exposure to oscillating movements of the extremities of whole body.
F:
Hazards:
Includes a variety of physical conditions (i.
e.
proximity to moving mechanical parts, electrical current, working in high places, exposure to heat and/or chemicals.
F:
Atmospheric conditions:
One or more of the following conditions that affect the respiratory system or the skin:
Fumes, odors, dust, mists, gases or poor ventilation.
F:
Oils:
There is air and/or skin exposure to oils and other cutting fluids.
O:
Air particulates / contaminants:
the worker is required to wear respirator.
RING POWER CORPORATION, INC.
IS AN EQUAL OPPORTUNITY EMPLOYERAbout the Company:
Ring Power corporation.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
